IETF81 Quebec NAT64 Network Experiment
This is a network experiment to see how NAT64 can be used, which
applications work and not work, etc... There is no garantee of the
Please share with us your experience about NAT64/DNS64.
Click here to take survey
To try the experiment, use the wireless SSID "ietf-nat64". This is
an IPv6-only network. The nat64 router has an IPv6 enabled interface
(2001:df8:0:7::1) on that wireless network and sends router
advertisements for 2001:df8:0:7::/64.
There is no IPv4 forwarding.
The other interface of the router is connected to the IETF backbone
with an IPv4 address: 184.108.40.206 and an IPv6 address 2001:df8:0:48::41/64.
The nat64 router forwards IPv6 packets as usual. Since it implements
DNS64 and NAT64, it also translates packets when destination is IPv4. Your traffic to IPv4 destinations will use 64:ff9b::/96 on the IPv6 side and after translation, will use 220.127.116.11 as source address.
To use this service, your computer MUST BE CONFIGURED TO RESOLVE DNS names to the DNS64 DNS server. If your OS (such as MacOSX) does not support DHCPv6 stateless or RDNSS for DNS server IPv6 addresses, configure "2001:df8:0:7::1" as your DNS server. Moreover, you might want to disable IPv4.
DNS IPv6 address: 2001:df8:0:7::1
Default IPv6 gateway: 2001:df8:0:7::1
Translating IPv6 prefix: 64:ff9b::/96
Translated IPv4 address: 18.104.22.168
Flush your DNS resolver cache. On MacOSX: dscacheutil -flushcache.
The implementation is available as open-source.
If you find any issue, please send email to firstname.lastname@example.org